LightLEEDer EVO Programmable to Pre-Program Conversion

Library, Lobby, 3 or 4-Zone, 2-independent Daylight Zones 3-Scene, MZD4, MZD1.

Photo sensor inputs for 1 or 2 daylight zones, motion sensor inputs for Occupancy, Vacancy or Occupancy On at 50%.

Remote digital CAT-5 LightSync G3 3-Scene switch +Off and  Raise/Lower buttons, one LSG3-MZD4 switch for control of all zones, and a 1-Zone MZD for each zone.

General Room, 3 or 4-Zone, 2-independent Daylight Zones, MZD3, MZD4.

Photo sensor inputs for 2 independent daylight zones with individual sensors, motion sensor inputs for Occupancy, Vacancy control or Occupancy On at 50%, On-50% Off toggle SPST switch.

Remote digital CAT-5 LightSync G3 MZD or standard button switches for local room control w/3-ways setting, 1-each Individual Zone switch w/dimming.

General Room, 3 or 4-Zone, 1-Photocell, 2-Daylight Zones, MZD3, MZD4.

Photo sensor inputs for 2 daylight zones from One sensor, motion sensor inputs for Occupancy, Vacancy control, Occupancy On at 50%/Off, and On-100% /Off-50%.

Remote digital CAT-5 LightSync G3 MZD or standard button switches for local room control.

Two Office, 1 or 2‐Zone, 1‐Daylight Zones, MZD1, MZD2.

Photo sensor inputs for 1 daylight zone per room, motion sensor inputs for Occupancy On at 50% or Vacancy control.

Remote digital CAT‐5 LightSync G3 MZD‐2 or MZD‐1 per room, standard button switches for local room control

Two Office, 1 or 2‐Zone, 2‐Daylight Zones, MZD1, MZD2.

Photo sensor inputs for 2 daylight zone per room( one at ‐10% reduction), motion sensor inputs for Occupancy On at 50% or Vacancy control.

Remote digital CAT‐5 LightSync G3 MZD or standard button switches for local room control.

Two Room, 3‐Zone, 1 Daylight Zone & 1‐Zone, 1‐Daylight Zone.

Photo sensor inputs for 1 daylight zone per room, motion sensor inputs for Occupancy On at 50% or Vacancy control,.

Remote digital CAT‐5 LightSync G3 MZD or standard button switches for local room control.

Two Room, 3‐Zone, 2 Daylight Zone & 1‐Zone, 1‐Daylight Zone.

Photo sensor inputs for 2 daylight zone in the 3‐zone room and 1 daylight sensor in the 1‐zone room, motion sensor inputs for Occupancy on at 50% or Vacancy control.

Remote digital CAT‐5 LightSync G3 MZD or standard button switches for local room control.

Four Office, 1‐Zone each, Occupancy, 1‐Daylight Zone, MZD1, 2‐Scene.

Photo sensor inputs for daylight zones (PC1 & PC2), motion sensor inputs for Occupancy On at 50%, auxiliary Photo Sensor controller inputs (PC3 & PC4).

Remote digital CAT‐5 LightSync G3 MZD On‐50%/Off, 1‐button Non‐Dim switches for local room control, G3 2‐Scene, Dim to 0%‐Off + Raise/Lower.

Four Office, 1‐Zone each, Vacancy, 1‐Daylight Zone, MZD1, 2‐Scene.

Photo sensor inputs for daylight zones (PC1 & PC2), Motion sensor inputs for Manual‐On Vacancy‐Off control, auxiliary Photo Sensor controller inputs (PC3 & PC4).

Remote digital CAT‐5 LightSync G3 MZD On‐50%/Off, 1‐button Non‐Dim switches for local room control, G3 2‐Scene, Dim to 0%‐Off + Raise/Lower.

Corridor/Stairwell, 1 or 2-Zone, Occupancy High/Low Dim, 1 Daylight Zone.

Photo sensor inputs for 1 daylight zone(PC-1), Motion sensor inputs for Occupancy On-High/Off or Dim level control with  Building Open/Closed change of sequence.

Remote digital CAT-5 LightSync G3 control On-Off(Open)/Timed On-2Hr (Closed) Key switch or 1-Button switch's, and Optional hardwired key switch input (OSC: 03.4).

Classroom, 3‐Zone (a, b, bc, c) w/1 Daylight Zone, MZD3, 2‐Scene.

Photo sensor inputs for 1 daylight zone (b/bc), motion sensor inputs for Occupancy, Vacancy or Occupancy on at 50%.

Remote digital CAT‐5 LightSync G3 2‐Scene, Off, Raise/Lower. One MZD‐3 and Three independent 1‐zone MZD type switches for "a", "b", "c" and G3‐3S/3MZD switches.

Classroom, 3‐Zone (a, b, bc, c) w/1 Daylight Zone, MZD3, 3‐Scene, 3‐Scene/3‐MZD.

Photo sensor inputs for 1 daylight zone (b/bc), motion sensor inputs for Occupancy, Vacancy or Occupancy on at 50%.

Remote digital CAT‐5 LightSync G3 3‐Scene, Off, Raise/Lower. One MZD‐3 and Three independent 1‐zone MZD type switches for "a", "b", "c".

Conference room 4-Zone w/1-Daylight Zone, 5-Scene, MZD4, AV, TSS-2.

Photo sensor inputs for 1 daylight zones, Motion sensor inputs for Occupancy or Vacancy control, or Occupancy on at 50%.

Remote digital CAT-5 LightSync G3 5-Scene + Off station, MZD3 station, MZD1 for display wall lighting, AV Interface (LSSI-232) with Scene operation.

Double Conference room 4‐Zone w/1‐Daylight Zone, 5‐Scene, MZD4, AV, TSS‐2 Note: EVO‐4X/8X for 2nd Conference room 4‐Zones.

Photo sensor inputs for 1 or 2 daylight zones, Motion sensor inputs for Occupancy or Vacancy and Occupancy On at 50% using A LSOSI (LS:13) remote module.

Remote digital CAT‐5 LightSync G3 5‐Scene + Off switches, MZD4 switches, MZD1 for display wall lighting, AV Interface (LSSI‐232) with Scene operation.

An xxtension of FD and applies to Room 2 with a EVO-4X (02) to support an additional 4 R20D relay zones (R5, R6, R7, R8). 

Photo sensor inputs for 1 or 2 daylight zones, Motion sensor inputs for Occupancy or Vacancy and Occupancy On at 50% using A LSOSI (LS:13) remote module.

Remote digital CAT-5 LightSync G3 5-Scene + Off station, MZD3 station, MZD1 for display wall lighting, AV Interface (LSSI-232) with Scene Operation.

Open Office, 3 or 4‐Zone Open/Close Timer sweep, 2‐independent Daylight Zones.

Photo sensor inputs for 1 or 2 daylight zones, Timer 1 Open ‐ 6:00am ON / Timer 2 Close ‐ 10:00pm ‐ Off sweep repeated every 2 hours w/Blink Alert.

Remote digital CAT‐5 LightSync G3 MZD4 or MZD3, standard button switches for local room control.

Open Office, 3 or 4‐Zone Motion‐On (Open) On/Off (Close time), 2‐independent Daylight.

Photo sensor inputs for 1 or 2 daylight zones, Timer 1 Open 6:00am ON / Timer 2 Close ‐ 10:00pm ‐ Off sweep repeated every 2 hours w/Blink Alert.

Remote digital CAT‐5 LightSync G3 MZD4,or MZD3, standard button switches for local room control, Occupancy Sensor Inputs change from "On Only" during the day to ON/Off at night.