ILC-SWX-1-D Line Voltage Wall Switch Occupancy Sensors WDimming ILC-SWX-1-D Line Voltage Wall Switch Occupancy Sensors WDimming
ILC-SWX-100-D 0-10v Dimming Wall Switch Sensor LV ILC-SWX-100-D 0-10v Dimming Wall Switch Sensor LV

0-10V Dimming Wall Switch Sensor Line Voltage

Model: ILC-SWX-100-D

The Intelligent Lighting Controls family of wall switch occupancy/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the ILC 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. ILC products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

Cutsheets

0-10v Dimming Wall Switch Sensor Line Voltage

pdf

Installation Guides

0-10V Dimming Wall Switch Sensor Line Voltage

pdf
Specifications

Electrical:

  • Operating voltage: 120/277 VAC, 50/60 Hz
  • Load ratings: MAX: 800W @ 120VAC, 1200W @ 277VAC, MIN: None
  • Load types: LED Driver/Lamps, CFL, Electronic/Magnetic Ballasts (Fluorescent), Tungsten (Incandescent)
  • Dimming compatibility: 0-10 VDC ballasts or drivers compliant with IEC 60929 Annex E.2
  • Dimming load: 50 mA (sink only)

Environmental:

  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Relative humidity: 0-95% Non-Condensing, Indoor Use Only

Physical:

  • Size: 2.74”H x 1.68”W x 1.39”D (6.96 x 4.27 x 3.53 cm), Not Including Mounting Strap
  • Weight: 4.5 oz
  • Mounting: Single Gang Switch Box
Resources

Typical Drawings

View Code Specific Room Typicals View Distributed Typicals View Relay Typicals View Stand Alone Typicals
Features

Electrical Features:

  • Interchangeable line & load wires - impossible to wire backwards
  • Accommodates neutral (3-Wire) and no-neutral (2-Wire) installation
  • Electronically timed switching ensures long relay life
  • Compatible with 0-10V dimmable LED, and fluorescent lighting
  • Meets NEC 404.2(c) & 404.22 guidelines regarding powering over ground & current leakage

Physical Features:

  • Enclosure is 25-40% shallower than other sensors
  • Unique bat-wing shaped lens provides enhanced peripheral detection
  • Self-grounding mounting strap
  • Modern look and intuitive easy-tap buttons for on/off, raise, & lower
  • Rugged vandal resistant lens
  • Settings are adjustable without removing cover plate

Operational Features:

  • Wall-to-wall passive infrared small motion detection
  • Passive acoustic detection (Optional) - prevents false offs when no motion is present
  • 100% passive detection methods - no interference potential from external devices
  • Configurable sensor settings including time delays and occupancy/vacancy operating modes
  • Configurable dimming parameters including high/low trims, turn on levels, and curve types
  • Blue locator LED when lights are Off