LightLEEDer Reliant40 Relays
Models: R40-1, R40-2, R40-3
The Reliant40 relay is designed for durability, flexibility, and ease of use. This relay is a superior relay that employs 4 latching nickel-silver contacts. The relay is available in 1, 2, or 3 pole configurations for controlling 120 VAC to 480 VAC loads. It is UL and C-UL listed and is rated for 120 VAC to 347 VAC per pole with a current rating of up to 40 Amps. This relay carries a high fault SCCR rating of 18,000 Amps @ 347 VAC. It also features a manual toggle switch for ON/OFF activation and a Lock-ON/OFF switch to disable control from the panel electronics. Installation is easy with 1 screw and 1 push-on ribbon connector.
Cutsheets
Installation Guides
Specifications
Physical:
- .99” Wide x 2.0” High x 4.75” Long (1 pole)
- Accepts 8-12 AWG stranded Cu wire or 10-12 AWG Solid Cu wire
- Easy installation into any panel
- Removable ribbon connector interface
- Clearly marked connection designations
Low Voltage Control:
- 18 to 24 VDC
- Momentary duty rating
- 50 milliseconds minimum activation time
- 50 to 55 Ω coil resistance
- 100mA @ 5 VDC status & disable contacts
Electrical:
- 120, 277 or 347 VAC per pole (controls 208/240/480 loads)
- 40 Amps HID and ballast loads
- 40 Amp resistive loads
- 16 Amp electronic ballast loads (UL's limit)
- 1.5 Hp @120VAC motor loads
- 18,000 Symmetrical Amp SCCR @347 VAC
- Plug-load compatible
Operating Environment:
- Location: Interior Space
- Operating Temp.: 0° to 60° C
- Humidity: 10% to 90% Non-condensing
- Atmosphere: Non-explosive/corrosive
- Vibration: Stationary
Certifications:
- UL and CUL Listed
- FCC
Resources
Features
- Made in the USA
- UL and CUL listed
- Suitable for controlling all lighting loads
- Electronic ballast high current inrush load rating
- Relay contacts consist of 4 nickel-silver contacts designed for high currents
- Latching relay holds position without the presence of power, saving energy
- Plug-load compatible
- Relay configurations available in 1-, 2-, or 3-pole ganged assemblies
- Manual lever override switch with highly visible indicator
- Lock-ON/Lock- OFF feature disables On or OFF control from the electronics
- Terminals consist of 2 line and 2 load connections
- Screw-actuated wire clamps for use with 10-12 AWG solid or 8-12 AWG stranded copper wire
- Easily mounted - as easy as interfacing a tab and securing with a screw
- Operates in any position
- Wire strip guide located on the side of the relay