EVO Lite Power Pack
The EVO Lite power pack operates one load of lighting or plug load. This power pack includes 12 configuration options an on-board relay, and 0-10V dimming, integrated into one package for easy installation. The EVO Lite power pack is ideal for small offices or classrooms, made to meet energy code with daylight harvesting, plug load control, occupancy sensing, and vacancy sensing options. It has two RJ-45 ports: one to wire to switches and additional power packs, and another for sensors and additional power packs. This convenient and easy to
install power pack can be used as a single device or combined with other EVO Lite power packs, for multi zone operation.
Cutsheets
Physical:
- Enclosure: 3.199” x 3.603” x 1.672”
- 2 RJ45 connectors for connecting devices with CAT5 cable
- Devices are hardwired using CAT5 cable
- 3 wires for occupancy sensors exiting the enclosure into the plenum space
- Plastic enclosure with ½” molded electrical nipple and mounting bracket
- Molded plastic enclosure with a 5VA flammability rating
- 12 AWG wire leads for line/load/neutral power, and 20 AWG wire for all Low Voltage leads. All are rated for 300VAC. Low Voltage wires provided with 600V heat shrink tubing
Operating Environment:
- Location: Interior space
- Operating Temperature: 0° to 50° C
- Humidity: 10 – 90% non-condensing
- Atmosphere: non-explosive/corrosive
- Vibration: Stationary
Electrical:
- 120/277VAC @ 50/60Hz
- Load Ratings:
- 16A Electronic Ballast (LED)
- 20A General Purpose (Plug Load)
- 20A Tungsten (incandescent)
- 20A Magnetic Ballast, ¼ HP @ 120VAC
- Incorporates a 50A relay, derated to load ratings.
- Optically isolated inputs
- 0-10V dimming, sink up to 100mA
- Push-button switch for setting configurations
Domestic Preferences:
- Domestic preference options to meet BAA or BABA requirements. BABA is the minimum Government compliance requirement for the Buy America Build America standards which is part of the Infrastructure and Investment Jobs Act (IIJA). Individual Government Agencies may have more stringent compliance standards. Please refer to the DOMESTIC PREFERENCES website or consult the CLS Domestic Preferences team for more information. Components shipped separately may be separately analyze under domestic preference requirements.
Certifications and Approvals:
- UL and CUL listed
- FCC Part 15
- Title 24
- ASHRAE compliant
- IECC compliant
- Made in the USA, meets BABA Requirements
- Enclosure suitable for plenum mounting
- RJ45 Outputs for up to 2 R20 relays
- Plug-load compatible
- Stand-alone relay pack with 0-10V dimming
- 350mA power provided for occupancy or vacancy sensors inputs
- RJ45 connectors for networking and CAT-5 devices