LightSync Digital Serial Interface Input Control Module LightSync Digital Serial Interface Input Control Module

LightSync Digital Serial Interface Module

Model: LSSI

The LightSync Serial Interface Input Control Module can be added to any LightLEEDer panel to provide LightSync device emulation from any building  automation system using BACnet IP, BACnet MSTP, Modbus RTU, Modbus ASCII and Modbus TCP. With the panel module, commands can be sent to the panel to trigger inputs ON and OFF, force photocell levels to drive dimming outputs, and read status of pilots and photocell levels. Inputs are mapped through the panels keypad or with LightLEEDer Pro software.

Cutsheets

LightSync Digital Serial Interface Module

pdf

Wiring Diagrams

LightLEEDer RS232/RS485 Serial Communications Module (WD1002)

pdf

Installation Guides

LightSync Serial Input Interface Control Module RS232-485 (ID0626)

pdf

LightLEEDer Serial Add-on Module (ID1015)

pdf

LightSync TCP/IP LSSIICM Interface (ID0624)

pdf
Specifications

Physical:

  • NEMA1 enclosure 6.5" W x 9.25" L x 2.5"D
  • 6” Power leads 120V
  • 1/2” Conduit nipple for connection to junction box
  • RJ45 connectors for interfaceing to LightSync network
  • Ethernet terminal with RJ45 for IP interface
  • Removable screw down connectors for RS485 or RS232 data communication
  • Rotary and dip switches for addressing and configuring
  • Mounting holes provided
  • Plenum rated enclosure

Electrical:

  • Powered from the panel
  • 5 VDC power supply provided

Operating Environment:

  • Location: Interior space
  • Operating Temp.: 0° to 50° C
  • Humidity: 10% - 90% Non-condensing
  • Atmosphere: Non-explosive/corrosive
  • Vibration: Stationary

Certifications and Approvals:

  • FCC Part 15
  • UL, CUL
Resources

Typical Drawings

View Code Specific Room Typicals View Distributed Typicals View Relay Typicals View Stand Alone Typicals

Technical Bulletins

LightLEEDer BACnet Configuration GUI (TB1019)

pdf

Product Details

LightLEEDer RS232/RS485 Serial Communications Module (PD1020)

pdf

LightSync Serial Input Interface Control Module (PD0625)

pdf

LightSync Serial Input Interface Control Module Enclosure (PD0626)

pdf
Features
  • Made in the USA
  • Digital CAT 5 ready
  • Direct communications for BAS or AV system control of LightSync input points
  • Emulates LightSync inputs and analog photocells
  • Status (pilots) of relays, groups, presets, and photocell levels
  • Installs directly into LightSync network using LightSync device addresses
  • Extractable files from BACnet
  • Control 1-64 LightSync devices
  • Adjustable Modbus baud rate
  • BACnet IP– an ASHRAE protocol communicating on a
  • TCP/IP network
  • BACnet MSTP– an ASHRAE protocol communicating on a RS485 network
  • Modbus RTU– a Modicon protocol communicating on RS485 in a binary coded format
  • Modbus ASCII– a Modicon protocol communicating on RS485 or RS232 in an ASCII coded format
  • Modbus TCP– a Modicon protocol communicating on a TCP/IP network