ONW-P-1001-MV ONW-P-1001-MV

Wall Switch Sensor, PIR, Line Voltage

Model: ONW-P-1001-MV

The Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-inone that is used for energy savings and convenience.

ONW-P-1001-MV is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON.  These sensors have multisegmented lenses. For units to sense motion, the person must cross between two segments. The distance between segments increases the farther you are from the sensor, so motion has to be larger the farther you are from the unit. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Cutsheets

Wall Switch Sensor, PIR, Line Voltage

pdf
Specifications

Technology:

  • Passive Infrared (PIR)

Mechanical:

  • Mounting Plate Dimensions: 4.195” H x 1.732” W (106.55mm x 44mm)
  • Mounting Plate/Strap Dimensions: ONW-P-1001-347: 4.35” H x 1.732” W (110.49mm x 44mm)
  • Product Housing Dimensions: 2.618” H x 1.752” W x 1.9” D (66.5mm x 44.5mm x 48.26mm)

Environment: 

  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Relative humidity operating: 20% to 90% non-condensing
  • For indoor use only

Housing:

  • Durable, injection molded housing. ABS resin complies with UL 94V-0
  • Mounting: Fits in a standard 3.5” deep back box. Can be mounted in multiple gang back box Refer to NEC box calculation for properly sized mounting box

Electrical:

  • Electrical ratings:
  • 120 VAC:
    • Incandescent / Tungsten max load: 6.7 amps, 800W, 50/60 Hz
    • Fluorescent / Ballast max load: 10 amps, 1200W, 50/60 Hz
    • Electronic Ballast (LED): 3A
    • Motor Load: 1/4 HP @ 125 VAC
  • 347VAC:
    • Fluorescent / Ballast max load: 4.3 amps, 1500W, 50/60 Hz
    • Electronic Ballast (LED): 3A
  • Ballast compatibilty:
    • LED loads
    • Magnetic and Electronic ballasts

Hardware Specifications:    

  • LED Indicators: Red LED = PIR detection, Green LED = acts as EcoMeter or night light locator 

Controls and Performance:

  • Time delays: Self adjusting 15 seconds/test (10 min. Auto), Selectable 5, 15, 30 minutes

Coverage:

  • Major motion: 36’ x 30’
  • Minor motion: 20’ x 16’

Light sensing level:

  • 0 to 200 foot candles

Standards/Ratings:

  • cULus Listed
  • FCC Compliant
  • RoHS Compliant
Resources

Typical Drawings

View Code Specific Room Typicals View Distributed Typicals View Relay Typicals View Stand Alone Typicals
Features
  • Air-gap switch ensures no leakage current to load
  • Selectable built-in light level sensor
  • NEMA WD7 Guide robotic method utilized to verify coverage patterns
  • LED Rated